Hotel banquet chair factory 2022? For most people, they will know that there are solid wood chairs and metal chairs, but when it comes to metal wood grain chairs, they may not know what product this is. Metal wood grain mean to do wood grain finish on the surface of metal. So people can get a wood look in a metal chair. Metal wood grain means to do wood grain finish on the surface of metal tubing. People can get a wood look and touch in a metal chair. Doing surface treatment in a chair, similar to make-up, first of all must have a smooth frame. All Yumeya chairs need to go through four polishing processes before they can formally enter the surface treatment process.Component polishing — Polishing after welding — Fine polish for the whole chair— Polishing after cleaning. After 4 steps, it can achieve good flat and smooth effect. Discover additional information on wholesale metal chair. No joint and no gap: The joints between pipes can be covered with clear wood grain, without too large seams or no covered wood grain.
For Cafe Chair, it is not only a furniture, but also an ornament. In full consideration of practicality and beauty, Yumeya wood grain metal cafe dining chair has obvious characteristics, safety, comfortable, washable fabric and so on. Yumeya wood grain aluminum cafe dining chair has more than 10000 successful cases in more than 80 countries around the world, including many well-known high-end restaurants such as HK Meixin, Il Cielo (Beverly Hills, LA), the most Romantic restaurants in LA. Cafe chairs wholesale, contact us.
In Yumeya, safety is the most important thing. Therefore, in the early stage of development and design, Yumeya’s design engineers will first evaluate the structure of the chair. All Yumeya’s chairs pass the strength of ANS/BIFMA X5.4-2012 and EN 16139:2013/AC:2013 level 2. The size is a very important parameter in the design. Without sacrificing the comfort, Yumeya’s engineering designers try all the best to improve the loading quantity to realize the highest cost performance of products.
The QC team, composed of 30 people, is distributed in each production link to conduct spot check on raw materials, semi-finished products and finished products, to find out the defective products in time, and record all production parameters, so as to facilitate the customer to order again in the future. Yumeya attaches great importance to all the production details, and all the semi-finished products and parts will get the best protection. Read additional details at youmeiya.net.
Cutting Machines: All Yumeya’s cutting machine were imported from Japan. It can make sure all the incision is smooth and the difference within 0.5mm against the international standard (within 1mm). Due to the thermal expansion and cold contraction in the welding process, there will be slightly deformation for the welded frame. So we must add a special QC to ensure the symmetry of the whole chair after welding. In this process, our workers will adjust the frame mainly by measuring the diagonal and other data. The final QC step in the hardware department is the sampling inspection of finished frame. In this step, we need to check the overall size of the frame, the welding joint is polished or not, the welding point is flat or not, the surface is smooth or not and etc. The chair frames can enter next department only after reaching 100% sampling qualified rate.
