Excellent hydraulic press machine manufacturer and supplier right now? Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits). See even more information on hydraulic press machine.
The imprint bending is the same as the bending of the bottomed die, except that the front end of the punch is processed to the required bending radius, and the gap between the punch and the die at th bottom of the stroke is smler than the material thickness. Since enough presure approximately 10 timesof fee bendig is applied to force the front end of the punchto contact the material, springback is basically avoided.
Through this partnership of shared experience and ideas, we are confident that we can realize your current and future requirements on WORLD press machine. Yingxin World Press Machine Company has exporting center in Shanghai with professional team to follow up logistic and document process, which also saves a lot of time in middle process. More than 65 years experiences focusing on producing power press machines.
When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.
The steady expansion of e-mobility and the legal regulations relating to conventional combustion engines are subjecting the traffic and transport sectors to comprehensive change. To reduce emissions, for example, lighter car bodies and vehicle componens are needed. In addition, crash safety also plays a role, because the accommodationof heay bateries in a vehicle requires appropriately designed body structures that take an accident scenario into account. While fiber composites are sometimes used in smll series in this context, materials such as high-stregth steel and aluminum are asserting themselves in large series construction with cntinuous refinement. n adition to the compatively lowsost, een reclilt s a significant advantage of metallic materials. However, their further development often poses new challenges for the processing procedures and the machines used. Read extra info on https://www.pressmachine-world.com/.
