Best street lights manufacturer and supplier: Flip Chip COB – Flip-chip is the next step in LED manufacturing. There is no wire bonding step, which results in better illumination, as the semiconductors require less space and can have denser formations. Since there are no wires, there is a lower blockage, leading to a further increase in illumination. Typically, high-end street LEDs will feature a flip-chip COB. Driver on Board (DOB) – It is a less common design opted by LED manufacturers as it increases the heat load in one area. LEDs require power to light up. The circuit that powers them is called the driver. Some designs with compactness or low-power applications can have DOB LED designs. The driver is beside the set of LEDs mounted on the same substrate. It is better to have a driver in a separate compartment to improve heat transfer capabilities and avoid damage to components in high heat and harsh environments. Discover extra information at led street light manufacturers.

Buyers must thoroughly consider the LED roadway light case design before purchasing. An intelligent design can prevent various failure scenarios, such as water entrapment, grounding, and heating. The material used as LED roadway light casing should be consecutive to dissipate heat and have holes to allow water to drain in case water finds its way into the circuit boxes. Grounding is also necessary to avoid electric shock and can be required by any local regulating body.

The most frequently used metal halide is sodium iodide. As the electric arc increases gas temperature, sodium dissociates from the iodine, adding orange as the metal ionizes. Metal halide lights offer higher efficacy than their counterparts. They produce up to 75-100 lumens per watt of electricity consumed. They primarily use lighting applications like sports arenas, automotive headlamps, and public places. They take time to reach full operating conditions as the pressure and temperature inside the gaseous mixture tube take time to warm up. This period can be as long as five minutes. As the metal halide lamp ages, the outer glass tube becomes weakened due to operational heat stresses. The pressure inside the tube can reach up to 3.5 atm. The tube at the end of life usually breaks inside the outer glass casing. Generally, their life span is < 20,000 lumens.

Tube Lighting is also commonly known as LED fluorescent tube, LED tube lamp, etc, and its light source uses LED as the illuminator. The traditional fluorescent tube is also called a fluorescent lamp. There is a filament at each end of the lamp. The tube is filled with a small amount of argon and thin mercury vapor. The inner wall of the tube is coated with phosphor, and the gas between the two filaments emits ultraviolet light when it conducts electricity. Let the phosphor emit visible light. Due to the heavy metal pollutant "mercury", the environmental pollution of scrapped fluorescent tubes is very serious.

CHZ Lighting is the leading LED street light manufacturer in China, offering professional LED lighting fixture solutions for muliti applications and environments. Our main products include road lighting, garden lighting, solar lighting, LED flood light, stadium lighting, industrial plant lighting, warehouse lighting, etc. CHZ is a professional LED street light manufacturer, LED flood light factory and lighting solution provider for over 12 years. We adhere to the high standards of “Technological Innovation, Consistent Quality”, continuously developing new products.

Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.

Solar Street Lighting Advantages: No need to lay cables, no AC power supply, no electricity charges; DC power supply, light-sensitive control; good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy-saving, economical and practical. Solar Powered Street Lights are widely used in urban main and secondary roads, residential areas, factories, tourist attractions, parking lots and other places. See even more info at https://www.chz-lighting.com/.

At present, there are two types of LED street light sources on the market: module type and integrated type.Street lights that use modular light sources, we usually call them modular led street lights, and those that use integrated light sources, we call them integrated led street lights. The price of integrated led street lights is cheaper than the price of modular led street lights, but modular led street light is still very popular. What are the reasons? The module LED street lamp has good heat dissipation performance and long service life.

It seems that smart street lights are indeed amazing, with so many powerful functions. Speaking of this, many customers may still not understand how smart street lights realize these special functions. In fact, the key point of smart street lights is the light pole (see the above picture). The light pole part is larger than the ordinary street light pole, and the entire light pole is installed. Intelligent street lamp system. It can meet the public wireless Wi-Fi function, support the loading of public security cameras and public broadcast functions, and it can also have a built-in charging module to become a charging pile, support information release, and video surveillance light functions.

The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.