Custom alloy wheels provider in China: Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason. Discover additional information at alloy wheels manufacturer.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
Since pure electric vehicles do not need an engine, the design styles of the front hoods of pure electric vehicles can be diversified, and are generally refined and sharp. The design style of “rocket front” is full of sports, and it is very windy on the road. The functional configuration of pure electric vehicles Its strengths, various types of assisted safe driving, are very popular with novice drivers. Now many first-tier cities are gradually implementing limited numbers and licenses. Many people have money to buy cars, but the number 1 license is hard to get, but the green license is not affected. Electric hybrid models, which are the only choice for car owners in many restricted areas.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Discover even more information at jjjwheel.com.
