Best rated steel jewelry manufacturer: The product was tested for 72 hours with a 5% Na cl brine to ensure that the oxide and plating layers of the product were not corroded, keep products fresh for a long time. Check the appearance of jewelry with 500 times strong light illumination to ensure that the appearance of the product is free of trachoma, scars, bumps, impurities, etc. The factory strictly enforces mutual inspection, self-inspection, and random inspection (three inspections) system. Quality management concept changes from the inspection of defective products to not manufacturing defective products. Find even more information at stainless steel jewelry.
You can drop a little vinegar or tea water on top of the silver jewelry, but do not soak it in it directly. Because this may damage the jewelry. After a few drops of vinegar or tea then wipe it with a wet hanky. Remember, when cleaning it must not use a wire ball, this is very harmful. Just choose a softer toothbrush and brush it gently. Then we will rinse it off again and it will be fine. We can also find a cup, and then pour some cola into it, and then put the silver jewelry into the soak. After ten minutes, we take it out and wipe it off with a wet handkerchief. The oxidized parts can also be easily removed. The acidity of Coke is not as strong, so it will be less harmful.
Anti-oxidation, high hardness. The hardness of titanium alloy (annealed state) HRC is 32-38. Low modulus of elasticity. The modulus of elasticity of titanium alloy (annealed state) is 1,078×10-1,176×10mpa, which is about half of steel and stainless steel. Strong acid and alkali resistance, high-temperature Wen low-temperature function is excellent. At high temperatures, titanium alloys can still adhere to the excellent mechanical function, their heat resistance is much higher than that of aluminum alloys, the working temperature planning is wider, and now the new heat-resistant titanium alloy working temperature up to 550-600 ℃; at low temperatures, titanium alloy strength instead than at room temperature, and has excellent resistance, low-temperature titanium alloy at -253 ℃ can also adhere to the excellent resistance.
Hanging ear studs: It is a stud-shaped design that hangs behind the ears and has no ear holes. These hanging earrings are becoming more and more popular. For example, the 2016 Balenciaga early spring holiday series used this exaggerated metal pendant earrings. Clip and magnet hanging earrings: For the convenience of people who do not wear pierced ears, some round earrings are designed as clips with ear beads. Particle-shaped or spike-shaped earrings cannot be designed as clips, and the characteristics of magnets need to be used to clip the ear beads. The magnet earrings are earrings with magnets on the outside and mini magnets with opposite magnetism on the inside. The two magnets firmly attract the ear beads.
All employees of the jewelry company(stainless steel jewelry wholesale suppliers&Custom jewelry manufacturers) worked together to develop the project. In 2008, KeKe Jewelry obtained the ISO9001:2000 international quality system certification. At the same time, KeKe Jewelry cared about the social environment. In 2010, KeKe Jewelry passed the IS014001:2004 environmental management system international certification, and obtained the title of environmental protection model Enterprise of Foshan Chancheng District, achieved OHSAS18001:2007 occupational health and environmental protection system certification in 2015, and became the chairman of Foshan Jewelry Industry in 2018. Find even more info on https://www.kejewelry.com/.
