Quality street light supplier

Led street lighting fixtures supplier today? CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers. Discover even more details at street lamp suppliers.

LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.

The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.

Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance.
See more info on chz-lighting.com.

The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.

Brightness: This is a measure of the magnitude of light produced by each lamp. There are street lamps that can deliver light to a circumference of up to 100m. Such light is critical in illuminating more oversized items that would otherwise be darkened at night. Most public spaces, such as open markets, depend on this brightness to continue transacting even at night. Most of these street lamps have an in-built photo sensor that ensures that the lamp is only on in low light conditions. In other words, the manufacturers of these lamps have been critical in ensuring that all the lamps operate only at night or in places where the lighting is poor. The LED lights do not function effectively during the day.