Premium bally flex tester supplier? Universal Testing Machine For Tensile Test Principle: Fiber tensile strength test machine is driven by the AC servo motor, through the synchronous belt and synchronous wheel drives the ball screw rotate, to make the beam up and down, after stretching or compressing the sample by the analysis of force sensor data from a computer system. The design of Universal Material Testing Machine is compliance with ISO, JIS, ASTM, DIN, GB, etc. Find even more information on ross flex tester.
Application of Single Yarn Strength Tester: Automatic Single Yarn Strength Testing Machine, to determine the breaking strength and elongation rate of single yarn made of cotton, wool, and others up to 6000cN, with air-driven clamps. Fully automatically test up to 20 cops at the same time. Features of single end yarn strength tester: Working pattern is CRE principle Automatic feeding of yarn, and automatic clamping for the test, fast and without damages to yarn. Fitted with Waste yarn collecting device, to make labs clean.
Correct use of computerized universal testing machine: It is strictly forbidden to use the Computerized Universal Tensile Strength Testing Machine price for overload and super speed. It is strictly forbidden to hit the lifting screw with hard objects and put on the lubricating oil on time. When mechanically replacing the V-belt, pay attention to the position of the hand to prevent pinching the finger. The transmission part must be covered with a protective cover.
Fabric color fastness to light machine Feature: The 2500W long arc xenon lamp is used to simulate the solar spectrum. High transmittance of filter combinations and use 95% of the transmittance filters and filter cartridges. With Low power consumption but achieve the same irradiation light requirements. To make the machine is more energy saving and environment friendly. Standard equipped with 420nm wave band, irradiance digital setting, real time monitoring, closed loop automatic regulation, providing the most stable irradiance test light source for different standards (340nm, 420nm, 300-400nm and 300-800nm band optional ). Test and radio transmission are powered by using light conversion technology, no additional power supply is required. With industrial temperature control (refrigeration) system for smoothly and fast adjusting temperature in test chamber.
Pneumatic Bursting Strength Testing Machine For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide with a digital readout of pressure with peak value hold facility, renewable rubber diaphragms, and manual clamping device with acrylic bell, forward reverse and neutral drive system. Provide accurate elongation information of fabrics, up to 0.1mm.
Universal testing machine (also known as tensile testing machine) that performs tensile, compression, flexure, peel, tear, shear, friction, and other types of mechanical testing in accordance with ASTM, ISO, and other industry standards. GESTER Abrasion Tester Professional manufacturer, providing a full range of solutions, Martindale Abrasion Tester in line with ASTM, ISO and other standard requirements, factory direct sales. See additional details at https://www.gesterinstruments.com/.
ASTM D4060 tests abrasion resistance of organic coatings by the Taber abraser. This type of test method was introduced around the 1930s to perform accelerated wear testing. Its simplicity and effectiveness helped to make the device broadly adopted for a multitude of test protocols and specifications on a wide variety of products around the world. If you have any questions about the Taber Abrasion, contact us. Gester instruments offers Taber abraser testing to ASTM D4060 as part of the Surface Coatings testing services.
