Metric cable gland and PG cable glands reviews? Our general accessories include lock nuts for securing cable glands, reductions and extensions, seals and sealing rings as well as blind plugs and blind disks. Naturally, we supply accessories in the appropriate materials for your cable glands. For our special glands for the ATEX, EMV and railway sector, you will receive the right accessory products which comply with the standards of the respective sectors. In addition, we offer earthing brackets to complement our EMV cable glands.
There’s a world of choices out there and unfortunately no one-size-fits-all option. But it does mean that you can custom select a cable gland based on your parameters. And to do that, you first need to consider a range of environmental and application factors. It doesn’t matter whether you’re working in aerospace, industrial, marine, power and utility, telecommunications or any other key industry. What’s important is identifying the core application environment of your cable gland.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Panel or enclosure cable glands : Specifically designed and rated for penetration into electrical panels and/or electromechanical assembly enclosures. Read extra details at PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Why Do We Use Cable Glands? A cable gland (or as sometimes called; a cable fitting) is a mechanical device used to securely attach the end of a cable to an instrument, junction box, or piece of equipment. Cable glands provide many functions: To firmly secure cable entering a piece of equipment, To maintain the ingress protection of the piece of equipment (minimum of IP54 for ‘e’ and ‘n’ type enclosures. Where the enclosure wall thickness is less than 6mm a sealing washer or thread sealant will be required to maintain IP54 protection).
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: this website.
